Mourad Metals is a trusted manufacturer and supplier located in Tunis, Tunisia, specializing in top-notch Stainless Steel 446 Bars and Rods designed for tough industrial settings. Crafted with cutting-edge manufacturing methods and rigorous quality control, these products are celebrated for their outstanding resistance to oxidation, scaling, and high-temperature corrosion. Stainless Steel 446 is particularly ideal for applications that experience continuous heat exposure, making Mourad Metals the go-to choice for industries that need durable, precisely dimensioned, and long-lasting bars and rods that consistently perform well under extreme thermal and corrosive conditions.
Stainless Steel 446 is a ferritic stainless steel alloy with a high chromium content, usually between 23% and 27%, and very low levels of carbon. Additional elements like silicon and manganese boost oxidation resistance and structural integrity. This grade provides good tensile strength, moderate hardness, and excellent scaling resistance at temperatures reaching around 1100°C. It also boasts low thermal expansion and solid mechanical stability, making it perfect for extended high-temperature use without significant distortion.
| Grade | Stainless Steel 446 (UNS S44600) |
|---|---|
| Specification | ASTM A276, ASTM A479, ASTM A182 |
| Round bar size | Diameter: 3-~800mm |
| Hex Bar size | 2-100mm A/F |
| Flat bar size | Thickness: 2 -100mm |
| Width: 10 to 500mm | |
| Square bar size | 4 to 100mm |
| Angle bar size | 3mm*20mm*20mm~12mm*100mm*100mm |
| Section | 3.0 to 12.0mm thickness |
| Channel Bar | 80 x 40mm to 150 x 75mm section; 5.0 to 6.0mm thickness |
| Hollow Bar | 32mm OD x 16mm ID to 250mm OD x 200mm ID) |
| Billet Size | 1/2″ to 495mm Diameter |
| Rectangles Size | 33 x 30mm to 295 x 1066mm |
| Finish | Cold (bright) drawn, centreless ground, hot rolled, smooth turned, peeled, slit rolled edge, hot rolled annealed, Rough Turned, Bright, Polish, Grinding, Centreless Ground & Black |
| Tolerance | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Surface | Cold Drawn, Bright, Sand Blasting Finished, Hot Rolled Pickled, Hairline, Polished |
| Condition | Hardened & tempered, annealed |
| Technique | 446 Stainless Steel Cold Drawn, Hot Rolled, Forged Round Bar, Rod, Cold Rolled |
| Processing | Bar cutting to 650mm |
| Form | Precision Ground Bar, Flat Bar, Square, Round, Half Round Bar, Rod, Rectangle, Hex (A/F), T-Bar, Channel Bar,Blocks, Round Rod, Threaded, Profiles, Billet, Ingot, I/H Bar, Forging, Rings, Hollow, Triangle etc. |
| Our 446 Stainless Steel Round bar conforms to NACE MR0175/ISO 15156 | |
| Grade | C | Mn | Si | P | S | Cr | N | Ni | Fe |
|---|---|---|---|---|---|---|---|---|---|
| SS 446 | 0.2 max | 1.5 max | 0.75 max | 0.040 max | 0.03 max | 23 – 30 | 0.10 – 0.25 | 0.50 max | Balance |
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
|---|---|---|---|---|
| 7.5 g/cm3 | 1510 °C (2750 °F) | Psi – 75,000 , MPa – 485 | Psi – 40,000 , MPa – 275 | 20 % |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
|---|---|---|---|---|---|---|---|
| SS 446 | 1.4762 | S44600 | – | – | – | – | – |
Stainless Steel 446 Bars and Rods are known for their excellent resistance to oxidation, high temperatures, and corrosive environments. They also exhibit remarkable scaling resistance and durability, making them suitable for demanding industrial applications.
These bars and rods are widely used in industries such as petrochemical, chemical processing, power generation, and marine applications. They are also suitable for heat exchangers, boiler parts, furnace components, and high-temperature exhaust systems.
Stainless Steel 446 Bars and Rods find their place in various applications that demand exceptional heat and oxidation resistance. Common uses include furnace components, radiant tubes, heat exchanger parts, kiln fixtures, and industrial heating equipment. They are also utilized in the petrochemical and power generation sectors, refinery units, and exhaust systems, where high temperatures and corrosive gases are prevalent. These characteristics guarantee reliable performance, a longer service life, and less maintenance in harsh operating conditions.
We provide products that come with both mill test certificates and third-party test certificates, ensuring the highest standards of quality and compliance.
Mourad Metals is a leading manufacturer, supplier, and exporter of high-quality bars, rods, and forgings, catering to various industries in Tunis, Tunisia
Copyright 2024 Mourad Metals. All rights reserved
